Back to Overview

Spiral Fabric Maintenance: 5 Problems and How to Diagnose Them

2026-11-11

When spiral fabric seems to fail, the visible symptom is often only the end of a longer process. In dryer sections and selected industrial conveying or dewatering systems, changes in the feed, machine condition, cleaning system and material can all produce similar warning signs.

Replacing the cloth immediately may be necessary when it is damaged, but replacement is not a substitute for root-cause analysis. You need to know whether the problem came from the media, surrounding equipment, process chemistry or a combination of factors.

This article examines five common problems, the evidence you can collect and practical ways to narrow the cause. The recommended sequence is observation, measurement, safe inspection and controlled correction. Spiral fabric is generally assembled from loops rather than woven on a conventional loom. Its filler yarns and joining geometry strongly influence performance.

What Spiral Fabric Actually Does in the Process

For maintenance purposes, spiral fabric is a belt assembled from interlocking polymer spiral loops joined by cross-directional connecting yarns, often with fillers to adjust openness. A defect can appear on the media, in the surrounding machine or in the finished paper, board or other processed web. Those observations may share a cause, but they should not be assumed to prove one another.

The inspection should connect fabric condition with contact area and paper marking and other interacting conditions. Record the date of first occurrence, relevant process changes, exact location and the most reliable measured symptom.

Spiral fabric is generally assembled from loops rather than woven on a conventional loom. Its filler yarns and joining geometry strongly influence performance. Before approving a replacement, compare the current observations with a stable reference run. Photograph damaged or contaminated areas where safe, and check whether the same pattern appeared on previous removed fabrics.

5 Spiral Fabric Problems Worth Investigating

1. Filler displacement

What could be happening? Aggressive washing or mechanical contact can move fillers and alter local permeability. For spiral fabric, determine whether this is a local defect or a change across the full system.

To narrow the cause, inspect filler continuity and relate gaps to cleaning or contact points. Observe the process while the equipment is running steadily and compare readings with the current reference run. Record values with their units and the affected machine position.

Use approved shower conditions and an appropriate filler design. Check the next production period before declaring the issue solved; also watch for any new quality or capacity loss.

2. Poor seam alignment

This fault deserves careful interpretation. An improperly inserted pin or twisted loop can create a weak or raised area. The same sign can come from more than one part of dryer sections and selected industrial conveying or dewatering systems.

A useful confirmation sequence is to inspect the entire seam and check joining sequence against instructions. Keep the baseline from a normal run beside the new result so the crew can compare like with like.

Rejoin only with supplier-approved methods and isolated machinery. The correction should be documented and verified during stable operation, rather than judged from a short startup sample.

3. Unexpected marking

Before replacing the media, ask what changed. Loop geometry or localized filler variation can imprint a pattern on sensitive webs. The sequence of events may be more revealing than the symptom alone.

Inspection should focus on the actual symptom: Compare product surface defects with loop repeat intervals. Ask whether maintenance or raw-material changes coincide with its appearance.

Trial a lower-marking structure if other sources are ruled out. If the evidence remains inconclusive, continue the diagnosis instead of making additional uncontrolled adjustments.

4. Local contamination

Not every visible mark represents damaged fabric. Pitch or other residues can build up around loops and fillers. Begin with the operating conditions around the affected position.

Collect physical and process evidence together. Map deposits, inspect wash coverage and compare permeability. One isolated reading cannot show how the condition developed.

Address process contamination instead of relying only on increased cleaning pressure. Follow approved isolation and maintenance rules whenever hands-on inspection or repair is necessary.

5. Uneven belt tracking

Long-term deterioration and sudden failures call for different checks. Loop distortion, damaged edges, roll conditions or tension differences may affect stability. The machine history should guide the first inspection.

Build a short fault map. Inspect edges, rolls, guide system and tension. Compare the pattern with contacting equipment and any recent changes in operating load.

Mechanical cause analysis is essential before replacement. Preserve the failed material or inspection photographs for the next review and possible supplier analysis.

At-a-Glance Technical Comparison

Visible symptom Possible explanation First evidence
Filler displacement Aggressive washing or mechanical contact can move fillers and alter local permeability. Inspect filler continuity and relate gaps to cleaning or contact points.
Poor seam alignment An improperly inserted pin or twisted loop can create a weak or raised area. Inspect the entire seam and check joining sequence against instructions.
Unexpected marking Loop geometry or localized filler variation can imprint a pattern on sensitive webs. Compare product surface defects with loop repeat intervals.
Local contamination Pitch or other residues can build up around loops and fillers. Map deposits, inspect wash coverage and compare permeability.
Uneven belt tracking Loop distortion, damaged edges, roll conditions or tension differences may affect stability. Inspect edges, rolls, guide system and tension.

This Spiral Fabric comparison is an orientation tool. Start with spiral pitch and loop geometry and filler yarn configuration in the context of dryer sections and selected industrial conveying or dewatering systems; only an inspection and representative test can establish the appropriate specification.

Measurements That Make the Discussion More Reliable

A specification only becomes useful when it can be linked to field observations. For spiral fabric, gather a short set of measurements that you can repeat under comparable conditions. You should record the machine state and product grade with the value so that a later team can understand the result.

Indicator Units or basis How to interpret it
Air permeability specified test units Adjusted by spiral and filler design.
Loop and filler dimensions mm Affects contact, opening and continuity.
Seam pin specification material and diameter Controls joining compatibility.
Tension supplier units Shows mechanical operating conditions.
Fabric caliper mm Influences bending and roll interaction.

For Spiral Fabric, begin with air permeability and loop and filler dimensions, using the units shown in your technical record. Trend each value against the actual paper, board or other processed web result. Do not set a universal rejection threshold without the machine and supplier context.

Three views of Spiral Fabric are useful: its as-delivered spiral pitch and loop geometry specification, its condition after service and its measured effect on flexible sheet support, controllable air permeability and manageable joining. They answer different questions. Preserve the source of each observation rather than treating every figure as equally conclusive.

For troubleshooting, make a fault log that records the first occurrence, affected position, recent changes, a photograph where safe, and at least one measured indicator. The log should also record negative findings: a normal shower or stable vacuum can eliminate a suspected cause and save repeated inspection work.

3 Practical Situations and the Decisions They Require

Scenario 1: Board dryer group

In a fault investigation, the following sequence is instructive: A board machine needs a fabric that can be installed reliably during a scheduled shutdown. The first step is to confirm the timeline and isolate the affected operating position.

The team evaluates spiral joining, contact surface and dryer pocket conditions. Ease of joining matters only when the design also suits drying and sheet quality. Preserve the baseline and record what changed after each safe corrective action, even when the suspected cause turns out to be wrong.

Scenario 2: Deposits on a wet end belt

In a fault investigation, the following sequence is instructive: The mill sees material collecting between filler yarns. The first step is to confirm the timeline and isolate the affected operating position.

Technicians inspect the deposits and cleaning system before specifying a different filler. Openness and cleanability need to be monitored together. Preserve the baseline and record what changed after each safe corrective action, even when the suspected cause turns out to be wrong.

Scenario 3: Industrial dewatering conveyor

In a fault investigation, the following sequence is instructive: A plant considers a spiral belt for transporting a wet mat. The first step is to confirm the timeline and isolate the affected operating position.

Engineers compare product retention, drainage, tensile loading and cleaning access. A fabric suitable for a paper dryer is not automatically suitable for sludge or another application. Preserve the baseline and record what changed after each safe corrective action, even when the suspected cause turns out to be wrong.

Matching Evidence to the Situation

Situation First response What to avoid
Board dryer group Review the timeline, affected position and baseline. Changing several machine variables before identifying cause.
Deposits on a wet end belt Review the timeline, affected position and baseline. Changing several machine variables before identifying cause.
Industrial dewatering conveyor Review the timeline, affected position and baseline. Changing several machine variables before identifying cause.

Two Simple Calculations for a More Useful Review

Calculations can make a Spiral Fabric review clearer, especially when you are comparing air permeability or media operating expense. The following examples use hypothetical inputs for illustration. They do not establish the acceptable range for your installation.

Calculation 1: Permeability drift

Drift (%) = (current permeability – startup permeability) / startup permeability x 100.

If a loop measures 340 units at startup and 306 units later under the same method, the change is -10%. Confirm the same testing conditions before drawing conclusions about clogging.

For a Spiral Fabric decision, label the sample or accounting boundary, measurement interval and units. Otherwise the arithmetic may be right while the comparison is wrong.

Calculation 2: Surface load estimate

Average load per width = supported line load / useful belt width.

An illustrative 12 kN line load over 4 m of useful width corresponds to 3 kN/m. Actual stress is not uniform; engineers must apply the manufacturer’s rated limits.

For a Spiral Fabric decision, label the sample or accounting boundary, measurement interval and units. Otherwise the arithmetic may be right while the comparison is wrong.

A Practical Root-Cause Investigation Sequence

Step 1: Pin down the first symptom

Identify the earliest confirmed change, not just the largest visible defect. For spiral fabric, check whether it began on startup, after cleaning, after a feed change or gradually during a long run.

Step 2: Compare material and equipment

Inspect the media alongside the parts that contact or control it. Use the documented limits for air permeability, loop and filler dimensions and other relevant indicators, rather than adjusting the system by trial and error.

Step 3: Test one explanation

Choose the most plausible cause and a safe method to verify it. Review filler yarn configuration and contact area and paper marking when those factors are relevant to the symptom. Record any other repairs or setting changes.

Step 4: Confirm sustained operation

Once the correction is approved and the equipment is restarted, compare at least one quality outcome, one machine condition and the original symptom. If the result does not support the hypothesis, reopen the diagnosis instead of repeatedly replacing media.

Mistakes and Misunderstandings to Avoid

Replacing media without checking nearby components

Repeated abrasion, contamination or leaks may immediately damage a replacement. For spiral fabric, link the decision back to spiral pitch and loop geometry and confirm the observed result against a valid baseline. A short written hypothesis before the correction will help distinguish an improvement from a coincidence.

Changing several variables simultaneously

The team may then be unable to show which intervention helped. For spiral fabric, link the decision back to filler yarn configuration and confirm the observed result against a valid baseline. A short written hypothesis before the correction will help distinguish an improvement from a coincidence.

Ignoring records from the failed component

Used material often preserves evidence about deposits, force and wear patterns. For spiral fabric, link the decision back to joining system and pin and confirm the observed result against a valid baseline. A short written hypothesis before the correction will help distinguish an improvement from a coincidence.

Final Troubleshooting Advice

When spiral fabric performance changes, trace the symptom back through process conditions, equipment, cleaning and material condition. Replace a damaged fabric when needed, but do not overlook the cause that damaged it.

A short fault timeline, repeatable measurements and controlled corrections are more effective than repeated emergency changes. Preserve the findings so the next shift and the next shutdown can benefit from the work already done.

About Anhui Taipingyang Special Fabric Co., Ltd.

Anhui Taipingyang Special Fabric Co., Ltd. manufactures paper machine fabrics and industrial filtration products. The company operates quality and environmental management systems certified to ISO 9001:2015 and ISO 14001:2015. Contact Taipingyang with the application, equipment position, dimensions, operating conditions and current problem when requesting a technical recommendation.

Technical information reviewed: November 2026. Illustrative calculations and examples are not guaranteed operating targets. Confirm specifications, limits, cleaning procedures and safety requirements for the actual equipment and application.